Charnwood VIPERIC Thread Adaptor Exert M33 x 3.5 to 1'' x 8tpi Ideal for Collecting dust and

Ideal for Collecting dust and chips from small lathes

An ideal workhorse for the busy workshop where power and generous capacity are required but budget and space do not allow a bigger machine

Ideal for roughing out spindle blanks but they can also be useful for some finer work

the outside of the receiving blade is provided with a groove to reduce the influence of sap

Charnwood VIPERIC Thread Adaptor Exert M33 x 3.5 to 1'' x 8tpi Ideal for Collecting dust andHeadstock thread adaptor. To fit onto a lathe with M33 x 3. 5mm headstock thread. Suitable to mount a Scroll Chuck or Faceplate with a 1" x 8tpi thread. The thread adaptor has spanner flats to aid tightening or removal. This thread adapter has 2 locking screws for securing the adaptor onto the lathe. Centre located 7mm from the end. Includes 10mm diameter blind hole for tightening or removing using a suitable knock out bar. Specification Adaptor Type